Piping

Bundle vaporizer O2

Bundle vaporizer O2 with a capacity of 20,000 Nm3/h with cycling

Smoke diffuser in stainless steel 1.4541

This smoke diffuser consists of a cone with a length of 4,715 mm, made by crunching with 2 sectors of ~2,345 mm in length and 14 pipes 130x200 mm

Vaporizer, Southwest

Nitrogen vaporizer 15 000 nm³-h with water at 20°C

Vaporizer, Poland

Design and construction of an O2 vaporizer with a capacity of 8,000 Nm³/h and an operating pressure of 30 bar g using a steam supply at a pressure of 16 bar g.

Temperature-controlled table with its control panel

Study, realization and installation of 16 thermoregulated tables. Each one is composed of a table with integrated exchanger, a control panel and a control cabinet. Each table combines mechanical resistance and heat exchange requirements. We made a prototype and performed all the validation tests before manufacturing the last 15 tables.

Structure + Bottom Swing

Platform 8 m high with a surface area of 4.6 x 4.8 m. Traced and insulated tank with calculation T° at 500°C

Vacuum skid

Its function is to prime the electromagnetic pump used to extract sodium from the primary circuit of the Superphénix reactor at the Creys-Malville dc plant.

Helical bending

Study according to CODAP and realization of a 316L stainless steel CO2 exchanger for customer processes with a PMS at 40 bar g. Bending of tubes Ø33.4 x 4.55 mm.

Helical bending

Thermal and mechanical study and realization of 1 Xenon heater with a capacity of 108 kg/h with a PMS of 230 bar g. Bending of tubes Ø9.52 x 1.24 mm.

Helical bending

Thermal and mechanical study and realization of 16 heat exchangers with low pressure drop for a 304L stainless steel lysimeter with an internal diameter of 2,540 mm. Bending of tubes Ø60.3 x 2.77 mm.